Get a free roof inspection

05 · Commercial · Phoenix Metro

Commercial
Roofing
in Phoenix.

TPO, modified bitumen, acrylic and silicone systems for warehouses, retail, and multi-tenant buildings — installation, replacement, and coating restoration.

TPO & modified bitumen
Acrylic & silicone
PM-friendly billing
5.0★ · 469 reviews

03 · What it actually is

Commercial roofs the Valley keeps running on.

The commercial portfolio AZ Shingle Pros works on across the Phoenix metro spans warehouses and distribution buildings, retail strip centers, single-tenant restaurants, multi-tenant medical office buildings, and light-industrial flex space. The systems used reflect what each roof actually needs: TPO single-ply membrane for new installations and replacements, modified bitumen on roofs where redundant ply construction is the right call, and built-up systems where they're still the specification.

Restoration is often the better answer than tear-off. When the existing membrane is structurally sound and the insulation reads dry on a moisture-meter scan, an acrylic coating system extends service life by another ten to fifteen years at a fraction of replacement cost. Acrylic coatings perform well on commercial roofs with good drainage and minimal ponding, and they ship with manufacturer warranties that are renewable when the coating is refreshed at the end of its service life.

Silicone coatings are the right call when the roof has chronic ponding water at low spots — silicone tolerates standing water in a way acrylic does not. Where the moisture scan reveals saturated insulation, neither coating is appropriate; a full tear-off and replacement is the honest recommendation. AZ Shingle Pros makes that call from the data, not from the easier sale.

The operational side matters as much as the roofing system. Tenants stay in the building during the work — material is staged off-site and brought up only in the daily volume needed, after-hours scheduling is available where required, and the certificate of insurance lands with the property manager before mobilization so compliance is handled on day one.

Commercial flat roof installation by AZ Shingle Pros in the Phoenix metro

04 · Process

Five steps. Calibrated for commercial.

01 / Survey
Roof survey & moisture mapping
AZ Shingle Pros walks the full roof with the property manager or facilities lead, photographs every elevation and penetration, and runs a moisture-meter scan on flat sections to identify saturated insulation that won't survive a coating.
02 / Scope
Written scope & system recommendation
The recommendation comes in writing: TPO replacement, modified bitumen, acrylic restoration, or silicone restoration — with the reasoning, expected service life of each option, and the manufacturer warranty available with each.
03 / Estimate
Itemized commercial estimate, COI included
The estimate is itemized by trade and material — no lump-sum quotes. The certificate of insurance is provided with the proposal so the property manager can route the project through their compliance system on day one.
04 / Install
Mobilization, install, minimal tenant disruption
Material is staged off-site and brought up in the daily volume needed. After-hours work is available for tenant-occupied spaces. The crew lead provides a daily progress photo set to the property manager.
05 / Closeout
City inspection, warranty registration, as-built docs
The city closes the permit, the manufacturer warranty is registered in the property owner's name, and a final as-built documentation packet — including warranty terms, system details, and maintenance schedule — is delivered to the property manager.

05 · Scope

What's included — and what isn't.

Included in every commercial project

  • Roof survey with moisture-meter scan
  • Written system recommendation with reasoning
  • Itemized commercial estimate (no lump sums)
  • Certificate of insurance with the proposal
  • Permit pull and city inspection coordination
  • Daily photo progress to property manager
  • After-hours scheduling where required
  • Manufacturer-warranty system installation
  • Warranty registration in property owner's name
  • As-built documentation packet at closeout

Not included by default

  • HVAC unit removal & reset (coordinated with mechanical contractor)
  • Skylight glazing replacement (specialty trade)
  • Solar array removal & reset (separate scope)
  • Interior tenant-improvement work
  • Structural deck replacement beyond spot repair (engineered scope)
  • Roof drainage modifications requiring civil engineering

06 · Pricing

Itemized — no lump-sum commercial quotes.

Commercial roofing pricing depends on system selected (TPO, modified bitumen, acrylic, silicone), square footage, deck condition, mechanical penetrations, and access. AZ Shingle Pros provides itemized estimates only — labor, materials, mobilization, permit, and warranty registration are each line-itemed. Lump-sum quotes hide what the homeowner is paying for; itemization makes value-engineering possible without surprise.

07 · Common Questions

Commercial roofing, answered.

TPO and modified bitumen are the two most common new-installation systems for Phoenix commercial roofs. For restoration of aging flat roofs, AZ Shingle Pros installs both acrylic and silicone coating systems. Built-up and EPDM systems are serviced for repairs but rarely recommended for new installation in this climate.
Coating restoration extends service life when the existing membrane is structurally sound and dry — typically when the deck and insulation pass moisture-meter testing. If the moisture scan shows saturated insulation, coating over it is a short-term fix that traps the problem. Full tear-off is the right call when more than a small percentage of the roof shows wet readings.
Acrylic coatings are more cost-effective up front and perform well on roofs with good drainage. Silicone coatings cost more but tolerate ponding water — if the roof has chronic standing water at low spots, silicone is the system. AZ Shingle Pros recommends based on the moisture-scan results and the drainage profile, not on what's easier to sell.
The plan is designed around tenant operations. Material staging happens off-site; the daily volume brought to the roof is metered. After-hours scheduling — early mornings, weekends, evenings — is available for tenant-occupied retail and medical spaces. The property manager receives a daily photo set and a written progress note.
Yes. AZ Shingle Pros provides commercial-friendly billing — net-30 invoicing with the COI on file, progress billing for larger projects, and direct billing to the property management entity rather than the building owner where the management agreement specifies.
Manufacturer system warranties on TPO and modified bitumen run 15–25 years depending on the system selected. Acrylic and silicone coating warranties run 10–20 years and are renewable with re-coat. AZ Shingle Pros adds a written workmanship warranty covering installation. Full terms — duration, transferability, exclusions — are delivered with the closeout packet.

09 · Free written inspection

Send the property details — get a commercial site assessment.

AZ Shingle Pros schedules commercial site assessments within the same week. The on-site survey takes 60–120 minutes depending on roof size, and a written scope with itemized estimate follows within ten business days.

Office22402 N 24th Ave, Ste 3 · Phoenix, AZ 85027
HoursMonday – Saturday · 7am – 6pm

10 · Commercial

Commercial site assessment.

We reply within one business day. Your info stays private — never sold.